Series 655000 TSOP-to-DIP 0.600 [15.24] Adapter
FEATURES * Designed to allow user to cut 32-position adapter down to any size desired. * Pins are mechanically fastened and soldered to board using Aries' patented process, creating a reliable electrical connection and rugged contact. GENERAL SPECIFICATIONS * ADAPTER BODY: FR-4 with 1-oz. Cu traces * PADS: bare Cu protected with Entek(R) by Enthone or immersion white Sn to eliminate coplanarity concerns and solder bridges associated with hot air solder leveling * PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M * PIN PLATING: 200 [5.08] Sn/Pb 93/7 per ASTM B579-73 over 100 [2.54] CUSTOMIZATION: In addition to the standard products shown Ni per SAE AMS-QQ-N-290 on this page, Aries specializes in custom design and production. * OPERATING TEMPERATURE: 221F [105C] Special materials, platings, sizes, and configurations can be MOUNTING CONSIDERATIONS * SUGGESTED PCB HOLE SIZE: 0.028 0.003 [0.71 0.08] dia. * Will plug into standard IC sockets
ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice.
ORDERING INFORMATION
32-655000-10 32-655000-10-P for Panelized Version
Bristol, PA 19007-6810 USA TEL (215) 781-9956 * FAX (215) 781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18041 Rev. AA
|
